Brooks Internet FAQ Online Listing

The following pages/links are locations to every file/page located on Brooks Internet Software, Inc.'s main domain. If you find a broken link, please contact us and we will attend to the issue immediately. If you are looking for a specific page not found below, please contact us and we will assist you with finding the right page.

  1. AS/400 print jobs repeat over and over
  2. AS/400 print job goes into a *SND state
  3. Page range on an AS/400 Remote OUTQ
  4. RPM output different from printer output
  5. AS/400 print job stays in a *RDY status
  6. AS/400 print job goes into to *HLD state
  7. What happens to the jobs when RPM is not running?
  8. How to setup remote AS/400 OUTQ
  9. After an OS/400 upgrade, all jobs stay in SND state
  10. How to set the IP address in the AS/400
  11. Verifying a connection between the AS/400 and RPM
  12. What does the XAUTOQ option do?
  13. What other Destination Options are available?
  14. Mainframe telnet test
  15. Can't print from HP-UX server
  16. My AIX system queue is disabled automatically
  17. Can we print through RPM to a Novell print queue?
  18. Print to a Novell shared printer?
  19. Access is denied to a shared printer
  20. Problems with Windows NT LPR port
  21. Windows NT 4 printing to a Windows 98 share
  22. Dial-up Networking starts
  23. Printing to an Epilog Legend Engraver
  24. Printing to the AIX Unix LPD server
  25. "Host does not have access" message with AIX
  26. Printing to RPM from OpenVMS
  27. Printing from mainframes to RPM?
  28. Configure Tandem OS for RPM printing
  29. How to print to RPM from an IBM/VSE mainframe
  30. My first job printed, but all others are stuck in Xfer
  31. RPM is receiving but nothing was printed
  32. RPM does not respond
  33. RPM is not receiving on my Windows 9x System
  34. I can ping the PC, but can't connect
  35. RPM shows an "Xfer" state
  36. Multiple jobs arrive using Telnet printing
  37. Can't print from RPM to a shared printer
  38. What ports does RPM use?
  39. What ports does ExcelliPrint use?
  40. "Logon as a batch job" user rights assignment
  41. How do I print labels from the AS/400
  42. RPM overrides page orientation of A4
  43. When moving a spool file the OS asks for a printer
  44. OFFICE VISION asks for a printer to send report to
  45. What does the XAIX option do?
  46. RPM does not handle multiple files
  47. RPM "text" queue prints on 2 pages, not 1
  48. Will RPM work on an OS/2 system?
  49. Problems printing to an HP Laserjet 1000
  50. Printing to Apple LaserWriter 16/600
  51. Printing to Tektronix Phaser 560
  52. When printing large jobs, the job begins again
  53. LPD queue names for network print servers
  54. Does INTELLIscribe run under Windows XP?
  55. Can INTELLIscribe print through a firewall?
  56. Why is LPR Byte Counting Enabled required?
  57. When I print, I get a stair step effect
  58. There is no page between jobs
  59. RPM job placed in "Wait" Status
  60. I can not get a column report to compress
  61. What type of printers does RPM support?
  62. Will RPM Support Network Printers
  63. Warning: Printer limit exceeded
  64. Why does RPM automatically suspend a queue?
  65. PCL code is printing through raw queue
  66. One line appears at the top of each page
  67. Common Printing Problems (RPM)
  68. RPM takes a long time to print
  69. RPM shows different fonts for different printers
  70. Does RPM support bold text?
  71. Bold is not printing in my text queue
  72. How can I release a job in "wait" status?
  73. A small box and "E" print on every page
  74. PostScript files print as PostScript code
  75. Does RPM run on Windows XP?
  76. Does RPM support USB printers?
  77. Using PSF to control job separation
  78. Print to a specific tray using PCL
  79. Does RPM support IPDS?
  80. Does RPM handle AFPDS files, no but ExcelliPrint IPDS AFPDS does
  81. Raw queue output different from direct printing
  82. Problems when upgrading to OS400 V4R5
  83. Send plain text from the AS/400
  84. Will RPM receive jobs from an HP3000?
  85. Will RPM run in a cluster environment?
  86. Cannot print to inkjet printer
  87. Why upgrade INTELLIscribe?
  88. Fiery XJ network printer queue name?
  89. What are the Linksys print server Queue names?
  90. My programs no longer start automatically
  91. What needs to be done on my firewall?
  92. Does RPM fill up the registry?
  93. Characters are replaced by a question mark (?)
  94. Saving print jobs so they can be reprinted
  95. My print jobs are getting stuck in RPM
  96. Why upgrade RPM?
  97. RPM doesn't use the selected printer properties
  98. "?" print out in "raw" queue
  99. Which file prints first?
  100. RPM doesn't use the selected printer properties
  101. What issues does RPM 3.0/NT fix from RPM 2.3/NT?
  102. RPM creates a new queue automatically
  103. What data is passed to RPM?
  104. What are advantages to upgrading?
  105. Why does the Euro currency symbol not print?
  106. Can ExcelliPrint convert SCS to PDF?
  107. Setting up AS/400 for A4 paper size
  108. Managing AS/400 printing forms
  109. Setting up AS/400 to print to dynamic IP address
  110. Copying a remote outq on the AS/400
  111. AS/400 page range not working to RPM
  112. How to configure SGI IRIX to print to RPM
  113. Print to RPM from Solaris 9 and 10
  114. Print to RPM from Solaris 2.51
  115. How to setup queues on AIX 4.x
  116. How to setup an AIX 3.x queue
  117. How to set up SCO UNIX for RPM
  118. Setting Up Remote Printer on HP9000
  119. Setup instructions for Solaris 7/sparc
  120. How to set up Linux for RPM
  121. Additional assistance with SCO Unix
  122. Import "Workstation" object into NDS tree
  123. How to use a custom paper size in Windows NT
  124. Print Setup dialog does not open
  125. How to set up RPM with Lapres
  1. Using Ghostscript with RPM
  2. Print from INTELliscribe through Windows NT
  3. Configuring an Apple LaserWriter Pro 810
  4. How do I print to a Xerox DP 65 printer?
  5. I cannot print a banner page
  6. Upgrading INTELLIscribe
  7. How do I uninstall INTELLIscribe
  8. How do I use broadcast printing?
  9. How to set up RPM to receive from a DEC VAX
  10. Setup an MVS mainframe to print to RPM
  11. Do you have generic setup instructions?
  12. How to determine the IP Address
  13. Local Telnet test
  14. What is LPR/LPD?
  15. How to change the code page for a RAW queue
  16. How do I disable banner pages?
  17. How to get RPM to print text and PostScript
  18. Deleting install directories and reinstalling
  19. Can RPM start and stop dynamically?
  20. RPM detected another program using port: 515
  21. Copy Queue Information from PC-to-PC
  22. How to capture the control file?
  23. How to unzip the diskette files
  24. Upgrading RPM 9x
  25. Migrate RPM 9x to RPM Select
  26. How to print a custom sized form
  27. NT multi-user configuration problem
  28. The username on the banner is SYSTEM
  29. How to view the RPM NT 2.3.0.2 logfile
  30. How to unzip the diskette files
  31. Does RPM work on Windows NT Terminal Server?
  32. How to copy queue configuration
  33. Opening Log Options causes a server busy message
  34. Emergency need to reinstall RPM
  35. Error (-5006 : 0x80004005) during installation
  36. How to modify the line spacing?
  37. How to translate EBCDIC to ASCII?
  38. Can RPM handle FORTRAN codes?
  39. How to save file without printing it?
  40. Determining LPI and CPI for Text Queue
  41. How do you unhide RPM?
  42. Can't print over 132 columns per line
  43. How do I configure an RPM printer?
  44. What are RPM's security features
  45. How do I release a job in "hold" status
  46. Is there a way to backup my queue configuration?
  47. Configuring RPM for direct socket printing
  48. Does RPM have a "trusted host" option
  49. The Logfile is not working after upgrading
  50. Installing RPM Elite or Select on Windows NT
  51. Configuring RPM for direct socket printing
  52. Can I increase the printer limit?
  53. Upgrading from RPM 3.0 NT to RPM 4.5
  54. Upgrading from RPM 2.3 NT to RPM 4.5
  55. Upgrading from RPM 4.0
  56. Acrobat Distiller 5 hangs when printing from RPM
  57. How do I upgrade?
  58. How is the license verified
  59. How to print to ExcelliPrint from my host
  60. How to get capture file
  61. Creating PSFCFG
  62. ExcelliPrint doesn't list my printer
  63. Error: Failed Subcommand 4
  64. AS/400 V3R6 error
  65. Error: Printer Device needed
  66. Error: Writer ended abnormally
  67. Error: Cannot find data queue in library
  68. Warning: Unrecognized control line
  69. Received "malformed from address" from Unix
  70. Received "illegal format character 'o'" from Unix
  71. Fatal Winsock Error 10048
  72. 10050 Network is down
  73. Windows 3.1 GPF with Novell
  74. Fatal WinSock error! Can't create server socket:
  75. Error: Cannot connect to service
  76. RPC error 353 in the NT event viewer
  77. The service is disabled and cannot be started
  78. Cannot connect to service
  79. The remote procedure call failed and did not execute
  80. Can't access shared resources from NT
  81. Error printing to a shared printer
  82. Printing to an HP 5 causes SPOOL32 error
  83. Windows NT "exception not handled" error
  84. Fonts downloaded to this printer while connected
  85. Unable to create MsgBoxer Coclass
  86. BISILOCK.DLL uses function #6883 in MFC42.dll
  87. I cannot add another printer
  88. Spool32 cause gpf in <xxxxx.DLL>
  89. Offending command printed out with my print job
  90. Download header with each print job
  91. INTELLIscribe "time out" when sending jobs
  92. Error: Printer settings could not be saved
  93. Failed to initialize
  94. Client port 'xxxx' out of range
  95. Error: Unable to print binary file
  96. Error: Unrecognized control line
  97. Warning: Queue 'xxxx' not defined
  98. Browser works but I get an error message
  99. Error: Print error ending page
  100. I get a Krnl386.exe error
  101. Warning: Queue 'name' not defined
  102. Warning: Unrecognized control line
  103. Error: Invalid Page Fault
  104. Winsock error 10047
  105. RPMSrvc.exe - Ordinal Not Found
  106. Error: [10048]: Address already in use
  107. RPM event 232: Incorrect Function
  108. Error 0193: %1 is not a valid Windows Application
  109. RPM suspends the queue when it receives a print job
  110. RPM Warning: Failed create empty document
  111. The filename, directory name, or volume label syntax is incorrect
  112. Error 5006 during RPM installation
  113. A postscript error prints instead of the document
  114. Error: Cannot create empty document
  115. How to supress font substitution messages
  116. Font list doesn't have printer fonts
  117. Dot matrix printer prints very slowly
  118. Software that does Postscript translation
  119. Can I hold jobs and automatically send them later?
  120. RPM takes a long time to print
  121. Does RPM allow multiple printers for same job
  122. RPM is no longer licensed
  123. Does RPM have a reprint feature?
  124. Restart a hung RPM without restarting the computer
  125. Error message during RPM installation
  126. Automatically reply to message CPA3394


HOME | Unlock | Company News | About | FAQs | Cart | Account | Case Studies | Site Map | LPD | LPR | IPDS | Network Links
Solutions Partners | Software Forum | Privacy Policy | Resellers | Host to Windows | Print IPDS | Print Management
RPM Remote Print Manager® | INTELLIscribe® | ExcelliPrint® | Print Software | Print AS400 | UK Print Management | Network Print
©2010 Brooks Internet Software, Inc.